Sunday, August 31, 2008

CCNA 4.0 module 2 (Communicating over the network)

Options ** are Correct Answer
1. Which statements correctly identify the role of intermediary devices in the network? (Choose three.)
**determine pathways for data.
initiate data communications.
**retime and retransmit data signals.
originate the flow of data .
**manage data flows.
final termination point for data flow.

2. Select the statements that are correct concerning network protocols. (Choose three.)
**define the structure of layer specific PDU's.
dictate how to accomplish layer functions.
**outline the functions necessary for communications between layers.
limit hardware compatibility.
**require layer dependent encapsulations.
eliminate standardization among vendors.

3. What are the key functions of encapsulation? (Choose three.)
allows modification of the original data before transmission.
**identifies pieces of data as part of the same communication.
enables consistent network paths for communication.
**ensures that data pieces can be directed to the correct receiving end device.
**enables the reassembly of complete messages.
tracks delay between end devices.

4. Which two layers of the OSI model have the same functions as the TCP/IP model Network Access Layer? (Choose two.)
Network.
Transport.
**Physical.
**Data Link.
Session.

5. What is a PDU?
corruption of a frame during transmission.
data reassembled at the destination.
retransmitted packets due to lost communication.
**a layer specific encapsulation.

6. Which characteristic correctly refers to end devices in a network?
manage data flows.
**originate data flow.
retime and retransmit data signals.
determine pathways for data.

7. Refer to the exhibit. "Cell A" at IP address 10.0.0.34 has established an IP session with "IP Phone 1" at IP address 172.16.1.103. Based upon the graphic, which device type best describes the function of wireless device "Cell A?"
the destination device
**an end device
an intermediate device
a media device

8. Refer to the exhibit. Which three labels correctly identify the network types for the network segments that are shown? (Choose three.)
Network A -- WAN
**Network B -- WAN
**Network C -- LAN
Network B -- MAN
Network C -- WAN
**Network A -- LAN

9. Which three statements best describe a Local Area Network (LAN)? (Choose three.)
**A LAN is usually in a single geographical area.
**The network is administered by a single organization.
The connection between segments in the LAN is usually through a leased connection.
The security and access control of the network are controlled by a service provider.
**A LAN provides network services and access to applications for users within a common organization.
Each end of the network is generally connected to a Telecommunication Service Provider (TSP).

10. Refer to the exhibit. Which networking term describes the data interleaving process represented in the graphic?
piping
PDU
streaming
**multiplexing
encapsulation

11. What is the primary purpose of Layer 4 port assignment?
to identify devices on the local media
to identify the hops between source and destination
to identify to the intermediary devices the best path through the network
to identify the source and destination end devices that are communicating
**to identify the processes or services that are communicating within the end devices

12. What device is considered an intermediary device?
file server
IP phone
laptop
printer
**switch

13. Refer to the exhibit. Which term correctly identifies the device type that is included in the area B?
source
end
transfer
**intermediary

14. Refer to the exhibit. What type of network is shown?
WAN
MAN
**LAN
WLAN

15. Which layer encapsulates the segment into packets?
physical
data link
**network
transport

16. What can be identified by examining the network layer header?
the destination device on the local media
**the destination host address
the bits that will be transferred over the media
the source application or process creating the data

17. Refer to the exhibit. Which set of devices contains only end devices?
A, C, D
B, E, G, H
C, D, G, H, I, J
D, E, F, H, I, J
**E, F, H, I, J

18. During the encapsulation process, what occurs at the data link layer?
No address is added.
The logical address is added.
**The physical address is added.
The process port number is added.

19. What is the purpose of the TCP/IP Network Access layer?
path determination and packet switching
data representation, encoding, and control
reliability, flow control, and error detection
**detailing the components that make up the physical link and how to access it
the division of segments into packets

20. What is the proper order of the layers of the OSI model from the highest layer to the lowest layer?
physical, network, application, data link, presentation, session, transport
application, physical, session, transport, network, data link, presentation
application, presentation, physical, session, data link, transport, network
**application, presentation, session, transport, network, data link, physical
presentation, data link, session, transport, network, physical, application

if anything, juz leave a comment

2 comments:

Anonymous said...

Thanks alot for this questions answers. I find these very helpful!!!

Logan said...

Thank for CCNA module 2...